Being this is what I do on a day to day basis to make a living I always thought we needed a thread like this as a reference for people looking to get tires but not knowing what they might need/want. ... ... Now like I said I work at a wheel and tir...
copied from some lame forum ... ... Hello and welcome to the new Brake section of honda-t(A)ch.com. I'm BrakeExpert and I like brakes. I've built several different setups, even invented some. And though this thread will not discuss brake theory, th...
ok so im putting a turbo kit on my EM1 (B16A2) and all was going well...had all the piping etc put on. well i got my oil pan tapped for the oil drain line and then i have an adaptor to put on my oil sensor for the oil feed line. so we had to take off...
So i been pouring antifreeze for the past few days and dont know from where. My fan hasn't worked for about 3 and a half months but yet i have never had a problem with it over heating or leaking antifreeze. Today i removed my radiator and plugged all...
... yeh so ive had these rear disc for a good minute now and finally got the time to slap thse jokers on. ... i got the bitches on and tighten up all the bolts, bled the brakes, and went on for a test drive. the problem is i got this swaying problem...
I recently changed my headgasket and the camshafts are wobbly in the journal a buddy of mines i think over torqued my camshaft holders and the cams wouldnt turn so we loosened it back up and now the cams turn but seem to loop...
i've been hearing about using 10w30 instead of MTL. ... ... im a noob so can someone tell me about this? ... ... how do i go about changing trans fluid?...
... I recently replaced my Front brakes on my 4x114 setup. I know many people in the past never had confirmation on what would work since we all know that we can't just buy replacement rotors for this setup until recently with the fastbrakes kit. Th...
so i recently replace my front lower control arms on my 88 crx si and when i went to test drive it it would violently shake under acceleration and quit if u let off. so i figured that it was my passenger side axle since it was busted.. i replaced tha...
ok so its retarded i go to crank my car and turn the key, it clicks once thats all, i can hold it there like 4-6 seconds and then it will crank up....im thinking maybe the switch is going bad???...
So far actual OEM ones worked great till i screwed one up pulling it out for clutch replacement. Now these Orielly ones vibrate at certain speeds and click when turning, Ive replaced them twice and still same problems. I guess they are just ****...
Anybody used one of these? or know of a better one? ... Flex-a-lite 31147 ... http://store.summitracing.com/partdetail.asp?autofilter=1&part=FLX-31147&N=700+115&autoview=sku ... ...
100k about time to change em out. What are the factory plugs that are in it now? Part numbers would be nice. Denso Platinum, NGK Iridium Plug, AcDelco Platinum more than likey are going back in....
b18b burns oil like a dicksucker. ... ... no idea how to change cams tried to find vids on youtube. but no luckwas hoping one of you could help me out possibly a well explained website. ... the difficulty of the process. ... ... thanks :D...
I have a test pipe, will the rear o2 sensor plug up to it with no issues, or do I have to get a cat. converter. I am currently showing a P0141 code for not having a o2 sensor. Thanks....
i have a 95 gsr that had abs brakes in it, i have taken out the whole abs system. i bought a brand new 40/40 valve and brand new master cylinder but i left the factory gsr brake booster in, and the master cylinder doesn't bolt up to it. my question ...
So I need some help. I tried to be cool like Chase and wiretuck my bay. It all came out spiffy of course and I love that I took the time to do it.
I never touched the GD a/c wiring because I knew I'd be hooking it back up once I got the new stuff...
just adjusted the valves thinking it would be the problem. its still got clicking/knocking noise... there is oil on the bottom of the spark plug on cylinder 3. the car will start and run. what could this be....
i have just got arround to starting my all motor n/a built engine for the first time, 2 1/2 quarts of honda mtf in the tranny, now my question is has anyone or know of anyone who has used the royal purple engine brake in oil on there first inital sta...
the axle nut is tight the axle clips and its hard to pull out but if im on the interstate and rev out 3rd or 4th the axle will pop out i need some HELP! haha...
