Honda-Tach

**Posts:** 614

TURBO set ups anyone?

**Posts:** 3532

quater times?

**Posts:** 614

14.0 on azenis is the best time my bro got. the last run the tranny broke.

**Posts:** 72

81.5 LS block with 9.0:1 JE Pistons, Eagle rods (stock sleeves)
OEM Bearing, pump etc.
Fluidampr crank pully
GSR head with Supertech springs and retainers (stock port)
JG Edelbrock Intake manifold
68mm Professional Products Throttle Body
Neukin T3 topmount
44mm Tial wg
Garrett GT35r turbo .82 a/r
2.5" IC piping
50mm Tial BOV
blah blah blah...

426whp/2xxtq @ 14psi
54xwhp/341tq @ 20psi

If the kit doesn't sell, I'll probably be shooting for a bit more power running opend DP ;)

**Posts:** 139

gsr engine and trans
84.5 darton sleeves
wisecos
eagles
supertech springs
skunk retainers
skunk gears
victor x mani
75mm edelbrock tb
1000cc injector edel. rail aero fpr
neukin vvr mani and dp
gt35r
tial 44mm gate and bov
pwr cooler
aem 5 bar map
ati pulley
s300
and like bob said blah blah blah

563whp
426tq

shooting for around 650 next season with some cams

**Posts:** 1669

dang thats a nice set up dude

**Posts:** 562

laskey built, benson sleeved d16 75.5mm
eagle rods
CP psitons
stock port head
super tech valve train (spring, retainers)
zex59300 cam, switching soon to the bisi turbo 1.2
stock intake mani (victor X waiting to go on) with matching throttle body
CCfab mini ram turbo mani
gt2871r t25 flange .86 a/r
type rs bov
ebay intercooler
GM 3bar map
255 walbro
680cc precision injectors (switching to the new Bosch 1000cc saturated)
tial 38mm wastegate
tuned on Ectune

I think that is all of it. hmmm

made 331whp, and 260wtq at only 15.5 psi

**Posts:** 1669

nice power for a dirty d biggrin

**Posts:** 52

ls/vtec B18b bottom end 81.5mm
B16 Head
cp 9:1 Pistons
Manley Rods
Supertech valve train
Springs And Retainers
edelbrock intake manifold
880 percision injectors
skunk 2 cam gears
GSR trans with ITR LSD
SLowmotion Turbo Kit
60-1 stage 5 wheel
Percision 650 intercooler
Tial BOV and Wastegate
S300

400 @ 12 psi
517 @ 19 psi

-- Edited by Boosted-ej6 at 22:32, 2008-12-07

**Posts:** 1669

Boosted-ej6 wrote:

ls/vtec B18b bottom end 81.5mm
B16 Head
cp 9:1 Pistons
Manley Rods
Supertech valve train
Springs And Retainers
edelbrock intake manifold
880 percision injectors
skunk 2 cam gears
GSR trans with ITR LSD
SLowmotion Turbo Kit
60-1 stage 5 wheel
Percision 650 intercooler
Tial BOV and Wastegate
S300

400 @ 12 psi
517 @ 19 psi

-- Edited by Boosted-ej6 at 22:32, 2008-12-07

whats your 60 foot

**Posts:** 614

damn that d sounds nice! my new setup is almost the same but without the sleeves.

buddys gsr

HondataS300
stock sleeves
stock port
stock cams
stock tranny
550 rc injectors
eagle rods
je pistons
supertech valve terrain
skunk intake manifold
garret 60 trim (i think, i forgot what size it is)

300whp @ 10psi for the street

hes planing on turning it up to 16 or so psi once he gets a few more things

**Posts:** 2226

stock 4g63 motor
stock manifolds
stock turbo
comp 280 cams
ECUflash
HKS turbo back exhaust
buschar FMIC kit

421/433tq

**Posts:** 25

^^^^ Very nice i love that car.........tear.....

....weaping heavily...

-- Edited by honda_fan06 at 22:25, 2008-12-08

**Posts:** 1669

JdMhEaD wrote:

stock 4g63 motor
stock manifolds
stock turbo
comp 280 cams
ECUflash
HKS turbo back exhaust
buschar FMIC kit

421/433tq

u gonna have it done in a few weeks

**Posts:** 1308

boooost

**Posts:** 52

my 60 ft is 1.7's

**Posts:** 1669

Boosted-ej6 wrote:

my 60 ft is 1.7's

Very nice 60 ft, what size slicks u running

**Posts:** 1308

you thinkin bout boost kneenan ?

**Posts:** 1669

Emo Kyle wrote:

you thinkin bout boost kneenan ?

hmmmm yeah maybe with some other car

**Posts:** 52

im running 24.5 on 13 lenso's

**Posts:** 1158

i dont think i could handle 500whp in a civic. props to yall

**Posts:** 2226

Pussy

**Posts:** 52

its alot of fun, you can pretty much say goodbye to some bikes mostly 600's, maybe not new bikes

**Posts:** 2226

in my hatch i went door to door with a busa..who had his g/f on the back...

That night, was the most possible fun i have ever had in one night ever.

Put my turbo motor in, already tuned...

drove it the first time..

raced bikes bikes bikes, and more bikes....

for some reason...no cars would race me :(

I was on street tires too!

**Posts:** 614

i hate it when no cars want to race. it sucks!

**Posts:** 364

heres the setup i had on my volvo s40 :)

Custom GT2871R turbo kit
turbo port and polished
UPsolute custom ECU tuning
boost set to 1.7 bar (around 25 psi)
custom 3" downpipe wrapped in heat wrap
custom 3" exhaust
custom intercooler to throttle body pipe wrapped in heat wrap
custom turbo to intercooler pipe with HKS blow off valve wrapped in heat wrap
custom intake to turbo pipe wrapped in heat wrap
Custom K&N intake
Custom MSD 8.5MM Ignition Wires
HKS full auto turbo timer
TurboXS HPMBC
removed a/c condensor for intercooler flow
battery relocated to trunk and upgraded ground wires
Superior Products, Inc. intake manifold gasket
Superior Products, Inc. throttle body gasket/spacer
HKS Racing spark plugs
255lph fuel pump
RC Engineering 550cc injectors

-- Edited by mikenacarato at 11:08, 2009-01-14

**Posts:** 3

built ls
B18B 84mm sleeves
9:1 CP pistons
Manley rods
Crower stage 2 turbo cams
AEM camgears
Ferrea ss valves
Supertech springs and retainers
Precision 680 injectors
Slowmotion Motorsports ram horn manifold
Garret GT3040r turbo
Tail 44mm wastegate
Tail 50mm bov
PWR intercooler

412hp 375tq @ 18lbs 93oct

**Posts:** 41

- Garrett GT3582R Turbo
- Slowmotion Motorsports Turbo Manifold
- Slowmotion Motorsports 3” Downpipe
- Slowmotion Motorsports 2.5” External Dumptube
- Slowmotion Motorsports Charge Piping
- PWR Vertical Flow 24x12x3 Front Mount Intercooler
- Tial 60mm Wastegate
- HKS SSQV Blow Off Valve
- Competition Stage 4 Clutch
- OBX Limited Slip Differential
- Resurfaced Flywheel
- Bosch 1000cc Injectors
- Walbro 255 In Tank Fuel Pump
- Hondata 4-Bar MAP Sensor
- Hondata Boost Control Solenoid
- RBC Intake Manifold

458whp / 325 wtq @ 12psi - 93 Octane

Currently saving up for PPG straight cut gears and internals!

**Posts:** 1458

penis

**Posts:** 364

im missing my toybo :(

**Posts:** 394

MOBLEY wrote:

penis

Hmmmm,.....Closet case? hmm

**Posts:** 21

Peakboost kit (35r upgrade coming in sept)
Precision 780cc injectors
255 Walbro intank
Aeromotive inline fuel filter
Full return setup
3 Bar map sensor
Hondata boost controller solenoid

**Posts:** 15

-K20A3 bare block
-K20A2 everything else(crank, oil pump, head, etc...)
-Eagle H-beam w/ARP 2000 rod bolts
-Wiseco 9.0:1 86.5mm
-SuperTech valvesprings/seats/retainers
-ARP headstuds
-OEM gaskets/bearings
-Full-Race stage 2 (T3/60-1, .82 exh, HPC coated)
-VSRacing.net turbo blanket
-MAC solenoid for boost vs. gear
-Golden Eagle vacuum manifold
-Arizona Forced Induction fuel rail
-RC 1000cc injectors w/resistor box
-Aeromotive A1000 fuel pressure regulator w/Summit gauge
-Walbro 255L
-Custom fuel lines with Summit and Earl's components, -8 feed and -6 return
-System 1 fuel filter
-RBC intake manifold w/Karcepts adapter and Hondata img
-Omni Power 4bar map sensor
-GReddy Evo TT catback
-Thermo-Tec heat shielding/wrapping
-Hytech oil baffle
-Mobile 1 10w-30 w/Honda oil filter, BP 93oct gas
-NGK BKR8E-IX .025" gap
-Arthur of TrackMasters in Huntsville, AL tuned 450whp & 283ftlbs tq @18psi
-PPG Dog box(1-4 & input shaft), stock 5th and final drive, Autotech Wavetrac lsd
-Competition Clutch stg 4, Exedy 9.5lbs flywheel
-Hondata K-Pro

**Posts:** 1140

Thanks for killing it tiger..lol

**Posts:** 710

imma turbo the fit...

**Posts:** 1140

It needs to be

**Posts:** 710

you need to have a running car

**Posts:** 1458

**Posts:** 2226

2000 ITR
LS VTEC...wonder whats inside?

its turbo charged, with a fancy peakboost kit, and a GT35R, 4 inch down pipe.

AEM engine management.

the car probably makes 250whp on a good day with race gas.

it runs 14.0s on slicks.

im hoping to break into the 13s next season.

**Posts:** 710

hahhaha!

**Posts:** 15

Your setup looks better in person Michael. I'll be looking for a video of a 9sec run.

**Posts:** 2226

Thanks brother..i have a ways to go before a legal 9 sec pass happens..lol...need that rollcageee

**Posts:** 3

weak ass shat i gotta 92 sonoma that says you aint ready

**Posts:** 2226

shut up nick before i kiss you

**Posts:** 45

oooohhh!! free kisses from mikey!!!!

**Posts:** 1458